Watering Can Spout (Giesskannen-Brause) (Replacement Ersatz)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As some of the watering can spouts disappeared and I did not find a suitable replacement, I made one on my 3D-printer.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 319
- Wydruki
- 2
- Wyświetlenia
- 1097
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can make or buy. If you do not find a suitable size you make!
Designed with TinkerCad. Printed on MK4 (PETG) and V0.1 (HIPS). Printed dotted side on bed, after finished printing I carefully heated up the flat surface with heat gun (inside and outside) and blew up a rubber balloon from inside, so the bulge was created. It required a bit patience and skills to do.
At least this experience was quite useful for my further projects.
But it works!
Explore my other Printables: https://www.printables.com/de/@Tritschi