Quest 3 "Quest Pro" Style Gasket for Increased FOV / Open Periphery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This gives you a faceplate that can increase FOV and give you that peripheral vision like a Quest Pro.
- Ocena
- 4 / 5
- Polubienia
- 129
- Pobrania
- 774
- Wydruki
- 1
- Wyświetlenia
- 8367
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This gives you a faceplate that can increase FOV and give you that peripheral vision like a Quest Pro. I prefer this “open” design and many others do too.
You will have to use a bit of velcro tape and source your own pad.
Recommend printing as oriented with organic supports. (0.2mm layers was fine for me)
Edit 1: Added a Larger Nose version for a bit more nose space.
Edit 2: Added a revision with better clips, larger nose support and sides that come slightly lower down for more stability (Because of this I would recommend more of a cut “U” gasket instead of a quest pro style gasket. (If that makes sense)
2024-09-19
I added a tweaked version that gives a bit more support on the sides, but still leaves the bottom area open, (Some might like this, some might want the original version; it also has a much cleaner nose area that stops it from bumping into your nose all the time.