1 / 3
TPU Cap & Protection for Geekvape Z Sub Ohm 2021 Tank 5.5ml — zdjęcie 1
1 / 3

TPU Cap & Protection for Geekvape Z Sub Ohm 2021 Tank 5.5ml

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2 parts in TPU to protect the mouth piece and air slot from pocket-sand and/or the glass of the tank.

Ocena
0 / 5
Polubienia
12
Pobrania
110
Wydruki
1
Wyświetlenia
689
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

I printed them with TPU and with FUZZY SKIN to give them a nice grip. → Outside walls, thickness 0.5mm and point distance 0.7mm.

For the tank cover I used Snug Supports. You also need to add a Modifier→Cylinder, 32x32x12mm, Position Z 10 with Fuzzy Skin set to None. Otherwise you'll get fuzzy skin where you don't want some due to the holes in the side.

You may choose a non-eye-burning color.

Tagi