Hygrometer holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hygrometer holder that is flush with the frame
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 291
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
It's an hygrometer/thermometer holder that appear flush with the frame and so doesn't conflict with Z axis whatsoever
EDIT: It does conflict with the cable behind the nextruder, so not suitable if the nextruder get at a high Z axis after a print, because it would never been able to home properly.
However the print is unfriendly for 3D printers, I dont know how to make it nice without supports. So I did a straight cut and a gluing but if you guys have a better idea let me know.
- 2x M3x12
Tested on my MK4 only. Give me feedback if it's MK3 compatible, I don't know much about Prusa yet