1 / 2
Adjustable Spool weight/desicant holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool weight for a wide-range of spools (52 mm - 74mm center bore). There are three chambers each sized for US pennies.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 147
- Wydruki
- 2
- Wyświetlenia
- 1786
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (20)Powiązane
Self-adjusting spool weight sized to fit a range of spools. If the center bore is >52mm and <75mm there should be no problem. Works best for spools with smaller center openings but is still acceptable on very large bore spools.
There are three chambers sized for US pennies, or similar.
Alternatively, you can use it for desiccant, by printing with no top/bottom layers. This is implemented in the 3mf file.