Elgato Stream Deck Mini Desk Mount V2 by Kyle Ireland

So I decided to make a better design to hold my Elgato Stream Deck Mini on my desk.
This mount uses screws or may even work with strong adhesive of some sort.

The four holes on the mount use 4.15mm screw hole spacing, I used two of the holes when installing on my desk.
3mm thick from the desk to the bottom of the mount.

You can find some different pieces of the mount in the included Fusion360 file, might be easy to modify to print in two pieces.
I printed this in one piece with tree supports.

There is a little slight bit of movement of the Stream Deck Mini in the mount.
My first Elgato Stream Deck Mini Mount was very basic and my first time designing and 3D Printing my own design.
This design works a bit better as it holds the mini from the sides.
I do wish it was easier to make a mount, my design for the Elgato 15 Key Stream Deck (20GAA9901) was much easier to make which was for my dad.

Printing

I just put the print in a good spot to mount with some tree supports so that the top looks smooth.

I printed with 0.2mm layer height on a Creality Ender 3 Neo with a 0.4mm Nozzle.
 

I used PLA for this print, it handed me whacking into it a bunch of times before cracking on one side.
It has a bit of flex to it if using PLA.
I recommend using PETG or ABS with high infill if possible.

Usage

Feel free to use and modify as you please with attribution, just post a make!

Could even use the Fusion360 file to get the main slot in piece to make your own design, just be sure to attach it as a “Remix” to this project/files.