Magic LED Wand Scepter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
A magic wand / scepter model for cosplay, Halloween or for kids play in general.
You can see the assembly here (will take you to the exact time stamp):
It utilizes a generic dollar store RGB lantern / lamp as the light source. I'm still trying to find the exact one online for purchase, otherwise you can print the 'LED-STAND-IN' model and glue your own RGB lights and battery on the inside.
I would suggest using an RGB module with ESP32 controller or WEMOS D1 mini and a simple small LiPO battery.
All models can be printed in PLA with 0.2 - 0.3mm layer height.
The model of the main “frame” will need some support under the tabs where the screws pass through.
The required hardware is:
- QTY: 4 M3x20 Thread Forming Screws
- QTY: 4 M3 x 6 Thread Forming Screws
- QTY: 6 M3 x 8 Thread Forming Screws
- QTY: 1 M3 x 12 Thread Forming Screw
If you have any questions please let me know and I would love to see your remixes and “makes” if possible.