Plate for Sculpfun S10 10W Laser with clamp for the cable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plate for the laser module with cable protector
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a new plate for the 10W laser module of my Sculpfun S10.
I got some breakages of the cable, inside the connector of the laser module, which goes to the laser module due to the laser movements.
Therefore I designed a new plate for the top of the module which has a clamp to prevent the cable from moving inside the connector.
Grundplatte ist the main part which is screwed to the laser, load it as one part into Slicer
Klemme lose is the part which is screwed to the base, clamping the cable.
Platte Laser mit Klemmung Kabel v2 contains everything.
Parts needed:
2x M3 nuts
2x M3x8 bolts
I layed both flat to the print bed and used supports from printbed only, but I dont believe it is really needed as the parts are quite small.