EXTREMELY LIGHT Gridfinity Baseplate (Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelled out baseplate. Save time. Save Filament.
- Ocena
- 4,778 / 5
- Polubienia
- 102
- Pobrania
- 741
- Wydruki
- 12
- Wyświetlenia
- 2192
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I made some thin baseplates that save a ton of time and filament. The models I have included are shelled out at 0.8mm.
I have included a parametric file for Fusion 360 - you can make any size grid and change the shell thickness.
If you don't have 360, and have a size request, just comment below and I'll add it for you!
I printed mine with a 0.4 nozzle, 0.2 layer height, and 3 walls. Shelled at 0.8. It printed great!
I tried printing at 0.5 shell, and it was too thin. I have not tried 0.6 or 0.7 yet.
A friend of mine printed it with a 0.6 nozzle and 0.32 layer height (with 0.7 shell). He said it also came out great!
Print it right-side-up. My slicer tried to print it upside down, and it didn’t work as well.
On a 5x5 grid, it saved me 10g of filament and almost 15 minutes of print time!