Star Wars Crucible Paladin-class Corvette
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of the Crucible, a Paladin-class Corvette from Star Wars: The Clone Wars.
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 268
- Wydruki
- 0
- Wyświetlenia
- 1022
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
The Crucible is a Paladin-class Corvette which appeared in Star Wars: The Clone Wars. It was an Old Republic-Era ship, used by the Jedi Order to take Jedi Younglings on a journey to construct their own lightsabers.
| Dimensions | Length | Width | Height |
|---|---|---|---|
| 1:2,000 scale | 50mm | 21mm | 10mm |
| 1:500 scale | 198mm | 84mm | 41mm |
The photos show the 1:500 scale version. One photo shows it alongside a 1:500 CR90 Corvette for comparision. The last four pictures are renders and not photos of an actual print.
Print Instructions
Requires supports. The pre-sliced files use organic supports.
For 1:2,000 scale, print “crucible-12000”. Recommended layer height is 0.1mm or lower.
For 1:500 scale, print “crucible-1500 bow”, “crucible-1500 stern”, and “crucible-1500 connector”. Recommended layer height is 0.2mm.
Also comes with a stand for the 1:500 version, “crucible-1500 stand”. It requires no supports.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
UPDATE [2023-10-26] Added photos