New Nintendo 3DS XL ergonomic grip smooth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I printed the model from Luckystrykx and have to say I didn't like the feel with the gap on the side. It had sharp…
- Ocena
- 4,75 / 5
- Polubienia
- 127
- Pobrania
- 1143
- Wydruki
- 7
- Wyświetlenia
- 7947
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed the model from Luckystrykx and have to say I didn't like the feel with the gap on the side. It had sharp edges, so I used Meshmixer to smooth it out.
I recommend printing it at 97% in PLA because it does not shrink as much as ABS. Also rotate it 45° to the back and print with a raft to avoid sharp edges at the bottom.
As soon as I printed it, I will upload a picture.
Update:
I printed the grip in red PLA with 97% scale and it fits like a glove! Very nice surface thanks to the 45deg orientation of the part.
Happy printing!
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Yes
Supports:
Yes
Resolution:
0.2mm
Infill:
15%
Filament:
OWL filament PLA