1 / 1
Halloween editable cabinet knob ~ Bouton de meuble modifiable Halloween — zdjęcie 1

Halloween editable cabinet knob ~ Bouton de meuble modifiable Halloween

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Halloween editable cabinet knob ~ Bouton de meuble modifiable Halloween

Ocena
5 / 5
Polubienia
37
Pobrania
83
Wydruki
1
Wyświetlenia
376
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution

(pour le français, voir plus bas)

Change easily your cabinet knob according your mood :) This is the Halloween edition!

Please, this project contains only the custom parts for Halloween. You need the main part (ECK) in my original project:

https://www.printables.com/model/309595

If you want a bat, you can use the “batman” logo on my original project or just ask me for a standard bat.

Actually, I print with .25mm or .2mm height and it's work well. Do not change the scale!!! If you want something else, just put a comment, I will try to make it (actually, I design monocolor and without relief, for example, if you want a Pokeball, it will be a simple circle).

Warning for the cobweb: if you encounter some problem with the first layer, you can lower the speed print or the acceleration on the first layer (unfortunately, those options are unavailable on PrusaSlicer, then I used SuperSplicer).

Sources:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Changez facilement votre bouton de meuble selon votre humeur :) Voici l'édition d'Halloween!

Veuillez prendre note que ce projet ne comporte que les parties modifiées pour Halloween. Vous aurez besoin de la pièce principale (ECK) sur mon projet initial:

https://www.printables.com/model/309595

Si vous souhaitez une chauve-souris, vous pouvez utiliser le logo “Batman” sur mon projet initial ou demandez-moi pour une chauve-souris normale.

Actuellement, j'ai imprimé avec une hauteur de 0.25mm et 0.2mm et cela fonctionne bien. Ne modifiez pas la taille de l'impression!!! Si vous souhaitez quelques choses d'autres, indiquez dans les commentaires (actuellement, je designe en monocouleur et sans relief, par exemple, si vous souhaitez une Pokeball, le résultat sera un simple rond).

Remarque pour la toile d'araignée: si vous rencontrez quelques problèmes à l'impression de la première couche, vous pouvez réduire la vitesse d'impression et/ou l'accélération à la première couche (options non disponibles via Prusa Slicer malheureusement, j'ai utilisé SuperSlicer à la place).

Sources:

Tagi