Screen dust protector V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 3 S1 screen dust protector V2. Better design (to my taste) Possibility of two (or more) colors print.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 85
- Wydruki
- 3
- Wyświetlenia
- 388
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A V2 so soon ?
Mmmmm, yes.
I wasn't so glad of the first one.
This one has an improved design and can be printed in multiples colors.
In both case, you have to insert lips (2 longs, 2 shorts) under the body to maintain the protector on the screen (2 longs, 2 shorts in PLA, or TPU like I did for more softness).
I included test files.
The width of the inserted part depend so much of your settings, particulary your first layer.
In my case, 1.7 fits for PLA, and 1.9 for TPU.
In two colors version, you have to print 4 of each insert (except the center one of course), and glue it in place (see pictures).
You can also put a different colour for the tip of the center insert.
I hope you'll like it.
Check other honeycomb designs : Ender 3 S1 honeycomb collection.
If you like it, then… like it!
If you print it, please post your makes!