Pushbutton Actuator (22mm) - Lovato LM2T replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two part flush pushbutton replacement for 8LM2TB10x
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- BSD License
I found a Lovato series LM2T 22mm modular input frame and contact, but did not have a push button actuator. This series has been discontinued so purchase was not really an option. This model is a simple replacement for the pushbutton actuator (see 8LM2TB102). Spring return action is provided by the contact(s).
There are two parts:
- Base (ring housing that locks into the frame)
- Plunger (colored part of the pushbutton that activates the contacts)
To assemble, press the plunger into the base. It is not designed to be taken apart once assembled.
I have also included step files to help anyone else that may have different needs.
NOTICE: The printed model does not carry electricity so this should be safe for use in a dry environment, however, if you decide to use this model you accept all liability.
Print Settings
| Infill | 20% |
| Layer | 0.2mm |
| Supports | From Build Plate |
| Nozzle | 0.4 mm |
Filament used:
- PLA Prusa Orange (plunger)
- PLA Galaxy Black (base)