Sovol SV05 - Power Supply Cover for Standard 215mm x 115mm x 50mm power supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sovol SV05 - Power Supply Cover for Standard 215mm x 115mm x 50mm power supply I had trouble with my printer reaching…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Sovol SV05 - Power Supply Cover for Standard 215mm x 115mm x 50mm power supply
I had trouble with my printer reaching 245 degrees so I replaced the power supply with a 480W. The original power supply is thinner than most that are readily available so the original plastic didn't fit. The mounting screw locations on the side seemed to be standard. So after trying it and my printer running like a dream. I needed plastic. I used some features of a design someone else had done because I liked it ( I would love to give credit as soon as I can find it again I will update), but I made it fit the SV05 similarly to the original.
Print Settings
Printer Brand:
Sovol 3D
Printer:
Sovol SV05
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
50%
Filament: Polymaker PETG Black
Notes:
I used cubic infill and tree supports
Category: 3D Printer Parts