1 / 3
HSW Filament Flush Cut Pliers Holder for Honeycomb Storage Wall
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert to mount flush cutting pliers on the Honeycomb storage wall, with little lip to keep pliers in place
- Ocena
- 4,869 / 5
- Polubienia
- 841
- Pobrania
- 4803
- Wydruki
- 74
- Wyświetlenia
- 9656
- Oceny
- 61
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 74) (Komentarze: 79)Remiksy (1)Kolekcje (1480)Powiązane
- simple insert to fit universal flush cut pliers for filament cutting etc.
- use with blank insert_hollow from the original HSW board
Check out my collection of HSW attachments here :)
Printing instructions:
- no supports
- use 4 perimeters
- layer height pictured is 0,2mm
Version history:
v1.1
1.12.2023
- the base is slightly larger for a better fit
v1.0
19.10.2023
- initial release