Rollbar Case for Orange Pi 4 Plus and Official Aluminum Heatsink
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, short printing, stackable protective stand for an Orange Pi 5 Plus and the official heatsink
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is just a simple little stand case thing to protect your Orange Pi 5 Plus.
It works with the Orange Pi Official Aluminum Heatsink ( Amazon # B0CJ9HTKMQ ).
I have more versions of this that work with different cooling solutions, I'll post others when time allows.
It is designed to be assembled with #4 self tapping screws ½" long.
Alternatively you could use some m3 x 8mm screws.
The board mounts with #4 self tapping screws ¼" long.
Alternatively you could use some m3 x 8mm screws.
The metric screws will work better if you run an m3 tap through the holes before using the screws.
If you want to use heat set inserts, I have included a STP file. You can feel free to load that up in your favorite CAD program and make appropriate holes for whatever kind of heat inserts you have. There are far too many different types and different suppliers of inserts have different external sizes.
You can also use that STP file for remixing or whatever.
If you like this model and find it useful, you can always send me a few bucks through paypal to thank me. All procedes go to buying whatever the next big thing in SBCs is (honestly probably a Raspberry Pi 5 at the time of publishing this).
