1 / 2
Chromatic tabor pipe in C (C5)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Finger pad adapters for a chromatic tabor pipe.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was fascinated by pfh's excellent tabor pipes which are playable with one hand but still have an octave and a half of diatonic range:
https://www.thingiverse.com/thing:260630
Several augmentations were of interest to me:
- Lowering pitch. Since these are overtone flutes, they are quite large for the pitch they produce.
- Chromatic capability. While some players can half-hole or cover the pipe end with their pinky to achieve accidentals, I was interested in options that might make chromatic play more practical.
- Reducing print time. 3D printers are overkill for printing large, simple shapes.
This dual finger hole adapter allows each of the three piping fingers to cover/vent two holes routed to different locations on the length of the pipe.
This pipe requires:
24" of 1/2" PVC pipe
3x prints of this dual hole adapter
1x print of the soprano recorder mouthpiece found here:
https://www.thingiverse.com/thing:5777473