1 / 1
Electric Fence insulator for Tractor-Supply Utility posts — zdjęcie 1

Electric Fence insulator for Tractor-Supply Utility posts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

electric-fence insulator for the T-slot Tract Supply fence posts

Ocena
0 / 5
Polubienia
22
Pobrania
137
Wydruki
0
Wyświetlenia
1114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Tractor Supply sells lots of fence posting for creating welded-wire fences (for around animal enclosures). So we needed to make a new fence for our goats. One of whom keeps going over the fence, so we needed to add an electric fence to the top. The problem is the "utility posts" that tractor supply sells (green steel extrusions) do not have a corresponding insulator for stringing the electric fence (or at least ours didn't). So here you go. Prints without supports (the little catch should be on top). As always I have included the STEP file if you wish to modify it for your fencing.

it is made for this fence post:
https://www.tractorsupply.com/tsc/product/garden-zone-light-duty-fence-post-4-ft?cm\_vc=-10005

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20


Filament:

Prusament PLA PLA Yellow

Notes:

You should probably print this is in some durable outdoor capable plastic (ABS/ASA or PC) But I just did it in PLA (it will fail in a couple of years, but so what). You should of course print it in a bright color (yellow is pretty standard or orange) to hint to people nearby that the fence is electrified!

Category: Outdoor & Garden

Tagi