Parametric MMSS parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Create your own MMSS blocks from building blocks
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This one is a bit different.
If you want to create your own shape for MMSS, such as a 2x7 or 5x5 it's tricky right now. But using these non-printable designs you can do exactly that. And hopefully less tricky.
Included are six base pieces to build other blocks, and this should be enough to build anything you want:
- outside corner (convex; what is seen on most blocks)
- inside corner (concave; built by me)
- wall connector (for straight parts)
- short wall (connects 1 corner and 1 wall connector)
- long wall (connects 2 wall connectors)
- 1x1 wall (connects 2 corners)
The files are provided individually or all together.
As a proof of concept, I'm including two new blocks built using only these and merging everything together:
- 3x3 square MMSS block
- 1x2 L block
If you're wondering how, the project is on OnShape to see what I did.
The pictured 1x2 L bin is available in my MMSS bin project.
Note: Please let me know if there's any problems with the inside corner piece. OnShape was being difficult with it and it might be off by a hair in the model (but prints perfect).
Revision History:
- 1.0 - Initial version with 4 parts and 3x3 block
- 1.1 - Added 1x1 wall, inside corner, 1x2 L block