Bicycle dummy pedal - shorty version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Short version of a bicycle dummy pedal, for working on bikes that didn't come with pedals. Needs an M6 bolt for strength
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 170
- Wydruki
- 1
- Wyświetlenia
- 1279
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
See https://www.instagram.com/p/CNA9ocSBPBU/ for more info. Short version of the bicycle dummy pedal which is lighter and takes up less room in a travel toolbox. This one is designed to work with an M6 bolt 65-70mm long. Make sure that whatever bolt you use at least makes it into the threaded part of the head for the best strength.
Axle and handle both optimized to print at 0.3mm on the MK3S in PrusaSlicer. Neither needs any lower layer height and you'll just wind up with a longer print. I usually bump perimeters to 3 for both the handle and the axle.
Because of the threads, I print the head finer, although 0.2mm has proven to be fine. Can go to 0.15mm if you feel like it, but no real reason to go any finer than that. Give the head plenty of perimeters - I go with at least five so that the threaded end is solid, but then you can stick with the default 15% infill for the grip part of the head.