Tengu Katana from 47 Ronin (2013)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tengu Katana from 47 Ronin (2013)
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
My Process:
I draw a 2D profile in NanoCAD (Free NanoCAD 5 non 3D capability). I export the file as a DXF and upload it to Fusion 360 (Free Version, still learning how to use) where I extrude add chamfers, fillets creating a 3D File. Export as an STL file. Then import it into Tinkercad where I finalize the file before uploading it to Printables. I know it is a lot of work but it works for me at the moment.
Longer pieces I divided up into 7-8 inch lengths so it should fit most printers if printed vertically (Blade, Saya and Tsuka (handle). The Tsuba should be printed vertically with supports (probably the most difficult part to print). I did not put a hole in the Tsuka for the traditional pin because I wasn’t sure how someone may want to attach the Tsuka. A little glue should be sufficient.
This is my largest project to date. A lot of parts. My printers are down so I have NOT printed anything to see how it comes out. I will include the full length blade and Saya so people can divide it up the way they want.
THIS IS A SHOW PIECE NOT INTENDED FOR USE !!!!!!
Thanks
Cyberbeast