Squash ball feet replacement/alternative
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Squash balls are expensive, but I do really like them as vibration dampener's here is version you can print out of TPU
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I've included a step file. If you would like to modify it it's designed to have a taper about a third of the way up and a flat bottom. You can install it with the flat bottom down or up. You may need to experiment with TPU settings to get just the right squish that you desire.
A sphere is hard to print even with a flat spot on the bottom so it's tapered just enough that it can print with no support and nice surface finish.
Big thanks to mce076 for this model i like it a lot and it works well with these balls.
https://www.printables.com/model/181102-squash-ball-anti-vibration-mount-for-3d-printer-cr