35mm Film Adapter for 120 Medium Format Cameras
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter kit lets you load 35mm film into a 120/220 medium format camera. It fits inside a standard film canister.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 206
- Wydruki
- 1
- Wyświetlenia
- 1674
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Usage
Print two of each part, one set for input and one set for takeup.
The top and bottom parts nest, enabling two sets (an entire kit) to fit into a standard Kodak-style film canister.
To load film, cut off the leader and tape to the film end of an empty 35mm canister. Film can be loaded in daylight.
Example photos from a Yashica-Mat 124G are shown.
Caveats
To use in cameras with viewing windows (like the Holga), the viewing window must be completely taped over.
Frame spacing has been tuned for Yashica TLRs (6x6) and Mamiya 645 systems. Frame spacing has not been tested on other systems, and there may be some frame overlap. Frame spacing will increase throughout the roll.
Printing Guidance
The models print strongest if they are printed on their “side” with support material. They print faster if printed facing “up”, but the tabs can break if too much pressure is applied by the camera while in use.