Paper size adjuster soennecken 5041 / papiermaatinstelding soennecken 5041 perforator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With rounded edges and everything! If you need a slightly different size, look at npo's parameterized remix.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
With rounded edges and everything!
If you need a slightly different size, look at npo's parameterized remix: http://www.thingiverse.com/thing:2162196
Print Settings
Printer:
Mendel90
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
standard
Notes:
To prevent warping, use a brim, glue, heated bed, or any other trick you know works on your printer.
Post-Printing
Write the paper size on it with a cd marker or fine liner.
Instructions
Make sure it does not warp of the printbed: I recommend PLA, a cold prinbed in a warm room, and a thin coating of hotglue or PVA-based glue.
(Alternatively, PLA and a 60 C printbed in a warm room)
A brim can help too.