Bayonet led lamp fitting thing for Klöckner-Moeller EF
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To fit LED's into moeler EF signal lamp or button fittings. LED (plus resistor soldered to LED) can be fit into this.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
To fit LED's into moeler EF signal lamp or button fittings. LED (plus resistor soldered to LED) can be fit into this and then fit into the lamp holder as if it is a bayonet lamp.
It is a bit finicky to print an it does not always make good contact. Might not whitstand vibrations well / in an industrial environment please use the actual manufacturer-recommended thing instead of this. For a hobby setting it could be usefull for others so that's why it's uploaded here but please note there is NO WARANTY OF ANY KIND!
Print Settings
Printer:
Mendel90
Rafts:
No
Supports:
No
Resolution:
200
Infill:
no matter
Printed in PETG