Vinyl plotter drag knife holder for wades extruder (mendel90)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder to mount a silhouette cutting plotter blade (drag knife) on a Mendel90 to use the 3d printer as a cutting plotter
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Holder to mount a silhouette cutting plotter blade (drag knife) on a Mendel90 3d printer, to use the 3d printer as a cutting plotter / vinyl plotter.
Might fit other printers as well. Meant for SILH-BLADE-3-3T, fits on extruder mounts that are meant for Wades block.
(So a Wades to Silhoutte converter?)
Set slicer to 1 outside perimeter, no infill, z-lift on retract and retract on minimum travel. Set z-offset so blade touches/presses on flexfoil/flockfoil/whatever you're plotting on. Put a piece of non-corrugated cardboard between printbed and foil to protect the blade and the bed.
More in Dutch / Meer in het Nederlands: https://www.eluke.nl/2022/02/03/vinylsnijden-met-een-3d-printer/
Print Settings
Notes:
Rotate the flat side to the bed before printing.
Should friction fit the blade, so maybe test-print a few layers first to see if it needs any scaling (or filing, or tape).