Revopoint Miraco 3D Scanner Turntable Centering Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 2 part centering adapter for the turntable that comes with the Revopoint Miraco 3D scanner.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 1660
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
Please keep in mind that this is a Pre-Kickstarter unit that I have so the size of this turn table might change when the retail unit comes out. That being said this is a 2 part setup and you might want to glue it together. No supports are needed but you might need to flip the model around in the software due to how I exported it.
If you have any question or problems please feel free to let me know. Also here is a short showing off this new Revopoint Miraco 3D Scanner. Once I get the full video about it done I will link it here as well.