1 / 7
Solea Dental Laser Arm Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Solea arm holder broke. I didn’t really like it. So, I made it better.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Solea Dental Laser arm holder was needed due to the original breaking. I didn't like the original, so lets make it better.
Updated Sept 2025 to V2 version with longer protector of the tube
Goals:
- Bigger support to make it easier to place the arm into the holder.
- Stronger
- Integrate nuts to hold the pieces together instead of just into the plastic. (Plus I wanted to practice this integration that Prusa uses so much on their printers)
Print flat on the bed and I would recommend PETG with 6+ perimeters.
Uses M3 bolts with square nuts. Bolts should have about 10-12mm of threads.