1 / 4
Print-in-Place Doorstop — zdjęcie 1
1 / 4

Print-in-Place Doorstop

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A print-in-place hinging doorstop that you can screw to your door, with a TPU tip!

Ocena
5 / 5
Polubienia
61
Pobrania
151
Wydruki
1
Wyświetlenia
762
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Prints in place, no supports needed. This model is very easy to put together - the main body breaks free easily, just apply force at the hinge like a fortune cookie. The TPU tip prints separately, just push it into the hole at the end of the doorstop arm.

Printed in PLA with 0.2mm layer height.

Tagi