2020 extrusion channel cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soft mesh cover that fits inside a 2020 extrusion channel to cover cables.
- Ocena
- 4,75 / 5
- Polubienia
- 57
- Pobrania
- 314
- Wydruki
- 4
- Wyświetlenia
- 2068
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Soft mesh cover that fits inside a 2020 extrusion channel to cover cables. When building my Voron 2.4, I had issues with extrusion covers for this purpose, as they protruded enough for the belts to rub on them. I used these to hide wiring for the lighting.
Print Settings (feel free to experiment): 2 outer walls, 0 top and bottom walls, 40% line infill.
The result is a flexible mesh that can slide down an extrusion, even past the screw of a blind joint. Then thread your wires behind it and that's all there is to it. Can resize to length or print multiple to stack.
The STL as provided can be printed on a v0 and will provide enough cover for top-mounted lighting on both sides on a v2.4 350.