1 / 2
Dia de Muertos (Day of the Dead) Themed Keychains — zdjęcie 1
1 / 2

Dia de Muertos (Day of the Dead) Themed Keychains

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A collection of keychains / key tags with Día de Muertos theming

Ocena
5 / 5
Polubienia
71
Pobrania
213
Wydruki
1
Wyświetlenia
830
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a collection of Día de Muertos (Day of the Dead) themed keychains / key tags. 

At 100% size, all keychains have four layers of the same heights, with total height of 2.8mm.

All keychain holes have an outside diameter is 8mm and an inside diameter is 4mm.  The widths of the keychain holes' rings are 2mm, and the heights are 1.4mm high.

Enabling ironing on top surfaces for best results.



Layer heights


There are four (4) layers of the following height (from bottom to top):

  • Layer 1 - 1.4mm high, layers 0.0mm to 1.4mm
  • Layer 2 - 0.6mm high, layers after 1.4mm to 2.0mm
  • Layer 3 - 0.4mm high, layers after 2.0mm to 2.4mm
  • Layer 4 - 0.4mm high, layers after 2.4mm to 2.8mm

Printing
 

All three (3) keychain / key tags pictured above were all printed with a 4.0mm nozzle, ironing all top surfaces, 1.0mm layer height, 25% infill, PETG filaments, and the following color changes:

  • Layer 1 - base color
  • Layer 2 - color change at layer height of 1.5mm
  • Layer 3 - color change at layer height of 2.1mm
  • Layer 4 - color change at layer height of 2.5mm

Tagi