Bikepacking strap on bottle cage mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds 2-bolt bottle cage mount, in case your frame misses the bosses. Designed for 35mm Downtube
- Ocena
- 5 / 5
- Polubienia
- 83
- Pobrania
- 335
- Wydruki
- 3
- Wyświetlenia
- 2429
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
My Salsa El Mariachi does not feature bosses for a bottle cage on the down tube (35mm).
Worked on a suspension fork as well.
I'm using bottle cages with standard 64mm distance between the mounting holes.
Printed the cage mount with high infill and number of perimeters in PETG for stability.
Place two M5 hex nuts in the pockets, put some old inner tube under the adapter to protect the frame and be careful not to use too long screws, or you'll screw up your frame.
Did not fail on my bikepacking trips. Anyhow be aware, that a failing part could lead to dangerous situtations, especially when used on a front fork.