Cobra Wine Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cobra snake you can print and place around a bottle of wine. You can also add a dispenser in its head
- Ocena
- 5 / 5
- Polubienia
- 211
- Pobrania
- 610
- Wydruki
- 2
- Wyświetlenia
- 4427
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an idea I had quite some time ago, and I always wanted to design something with a snake. So now that its halloween, I thought it was a good idea to design it.
The addition of the dispenser is completely optional, you can just print this as decoration around a bottle.
Off course, all bottles differ a bit in dimensions, so it is possible that you will need to scale the model a bit to fit your bottle.
I dimensionsed the body to fit around a bottle with the following dimensions:
approx 76.7mm in diameter
approx 304mm total height
I will include the bottle as an stl so you can measure it software of your choice.
All files can be printed pretty easily and are allready oriented correctly. I use brims on allmost all my parts.
For the head I support its chin so it can be printed. For that one I will add a 3mf file.
here are the components I used:
Detailled instructions in PDF will follow, but this video I made shows I build it:
Enjoy!