1 / 7
Installation of trash container in the QIDI TECH X-Plus 3 3D Printer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I printed this on the Elego Neptune Max with a 42cm x 42cm bed size
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 266
- Wydruki
- 1
- Wyświetlenia
- 1699
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 14)Remiksy (1)Kolekcje (56)Powiązane
Fit good and stable, for more stable i add holes for some magnet, I printed this in PETG on the Elego Neptune Max with a 42cm x 42cm bed size. You can also split this model if needed and use some glue."