Replacement knob for QUATTRO firefighter radio-controlled alarm clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement knob for QUATTRO firefighter radio-controlled alarm clock
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Object description:
Replacement button for an older firefighter radio-controlled alarm clock from the manufacturer QUATTRO, still in service.
Designed and printed for firefighter Andy, who sometimes unintentionally damage or lose this button. Always be careful and always come home healthy.
Maybe someone else needs this button too.
Print settings:
Material: PLA, PETG, ABS/ASA.
Layer height: 0,07-0,1
Nozzle diameter: 0,25mm
Infill: 50%
Perimeters: 3
Brim: yes, 4mm
Support: no
I highly recommend to print 9 or more parts at the same time. Otherwise the tip will be not printed well because of too much heat influence caused by the extremely short printing time per layer.