Stealth Press mount for 20mm soldering iron (including STEP files) - like the SREMTCH Soldering Iron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my attempt for a 20mm soldering iron mount for the stealth press. Used for SREMTCH Soldering Iron.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 288
- Wydruki
- 4
- Wyświetlenia
- 1478
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
I really like the stealth press by Iconic-FAB.com (@IconicFAB) and am looking forward to use it a lot. Sadly my soldering iron (SREMTCH Soldering Iron Set) - I bought solely for working with heat inserts - does not match any of the provided mounts. It should be pretty perfect for this, as it has a silicone sock, which should give the mount way more grip to hold the iron. Anyways the diameter is 20mm instead of the provided (I think) 16mm version…
So I created my own mount from scratch, adding some quality of life improvements for the print, too. I used the STEP files provided by @IconicFAB (big thanks!) to ensure everything is aligned (and I get the correct dimensions). This is especially important as the mount has a bigger external diameter (to ensure everything is still rigid enough) and you still want the soldering tip to match up with the bushing at the center of the foot. You can see in the photos this all matches up.
Feel free to use this. Also note I also did upload the STEP file, if you want to tinker with this. Additionally I did upload a STEP file without any chamfers or anything (the “Base” file) - this should be the perfect starting point if you need to create your own version.
In addition I also uploaded a wider version of the strain relief, as my cable was 6mm thick and the provided one only allowed for 5mm cables.