MatterHackers' Mascot Phil A Ment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The new MatterHackers mascot: Phil A. Ment!
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 203
- Wydruki
- 8
- Wyświetlenia
- 661
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
Introducing the new MatterHackers mascot: Phil A. Ment! Designed with troubleshooting in mind, Phil has several features specifically to put your printer through its paces. These features include: small inset details, small embossed details, overhangs, vertical and horizontal cylinders, fillets, chamfers, bridging, and even his perfectly domed helmet.
On a well calibrated 3D printer, this awesome little guy prints well at any scale; from 12 millimeters tall to 350!
Printed in MatterHackers PRO Series PLA at a 0.2mm layer height and 10% infill.
-https://www.matterhackers.com/store/c/PRO%20series%20PLA
If you have MatterControl, you can also find him in our Design Store to add him to your Cloud Library.
-https://www.matterhackers.com/store/l/matterhackers-mascot-phil-a-ment/sk/M6DV4FS2
Can you print any bigger than 350mm or smaller than 12mm? Share your make with us and we'll include you as a record holder!
Current Records:
-Smallest Phil: 5mm on the Peopoly Moai by Chris Lee (@chimpusmaximus on Twitter)
-Largest Phil: 1397mm on the Pulse HV and Lulzbot TAZ 6 with MOARstruder by MatterHackers
Designed by MatterHackers