1 / 6
VW MK8 GTI Torklift EcoHitch Radio Antenna Bracket — zdjęcie 1
1 / 6

VW MK8 GTI Torklift EcoHitch Radio Antenna Bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A bracket to hold the stock mobile antenna when installing a Torklift EcoHitch

Ocena
0 / 5
Polubienia
1
Pobrania
15
Wydruki
0
Wyświetlenia
455
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Torklift's EcoHitch is great for the MK8 VW, but has no place to mount the stock mobile antenna that's on the crashbar that you remove for installation.  Modeled and printed this to put the antenna back in it's standard location.

Printed vertically.  Added a small brim because the contact area is small due to the chamfer.  Used organic/tree supports.  Intended to use a bit of 2 part epoxy to secure it in the tube, but it ended up being a tight interference fit, so I just tapped it in with a bit of wood and a mallet.

Tagi