Gridfinity Magnet Hole Generator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric Fusion360 file to generate magnet holes to add to gridfinity models without them.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 229
- Wydruki
- 0
- Wyświetlenia
- 847
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
After finding several gridfinity models on Printables and elsewhere that I really liked, but wished they had magnet holes, I made this quick parametric design in Fusion360 that would let me output an STL that I could import as negative space in PrusaSlicer. You can set hole width, depth, and grid layout in parameters. Hopefully it saves someone else a bit of time.
I will note that after making this all configurable, I realized I could just keep a large one around and use that for most things I was printing.