Grabby Cat Door Stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This furball will hold the door for you, if only to get a look at whatever you're doing in there.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 870
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Kitty cat wants to know what's going on out there!
This is a wall-mounted door stopper that grabs the edge of your door with its cute little paws.
Designed for both Halloween and Door Stopper contests (not sure you can enter both with one model, but it was on theme regardless).
Model can be printed without supports or a brim if the arms are placed in the strong bed-sling direction and there is good bed adhesion, but I have included the gcode that includes a brim for extra support.
Print the model in PLA or PETG, or whichever filament isn't super rigid, as the door will push the paws out of the way as it opens and closes.
Can attach to the wall with thick adhesive tape. There's a 0.75mm recess to fit the tape w/o a very noticeable gap.
The arms can press-fit or be held together with just a dab of glue if required.
Scale the door stopper to whatever size you need so that the door's edge reaches the apex of the cat's arms.