Stealth Press MGN9H Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stealth Press mod to replace the MGN12 rail with an MGN9H rail.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 273
- Wydruki
- 4
- Wyświetlenia
- 2662
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
I modified only the parts of the Stealth Press that interface with the rail to allow for the use of the MGN9H, rather than the MGN12H specified in the original design. The modified parts are direct replacements only for the parts that interface with the rail, and are named to be consistent with the same parts in the ordinal design; you will still need the remaining parts from the original.
Note: There is no reason not to use the MGN12H specified in the original design, I made this mod so I could use MGN9H rails I had laying around from a Voron 2.4 upgrade.
Thanks to @IconicFAB for creating and sharing the original design!
Edit: Added the custom mount I made for the soldering pictured here.