Xiaomi MI Smart Plug 2 Casing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smart Plug electronics removed for original casing and put in new one.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Transform your old workshop floor stand light into a smart, app-controlled light using the Xiaomi Smart Plug 2. This project provides a 3D-printable casing that houses the electronics, seamlessly integrating the light with the Mi Home app.
Introduction:
Do you have an old workshop floor stand light that you wish had smart features? Look no further! This project allows you to retrofit your existing light with Xiaomi Smart Plug 2 components, giving you the ability to control your light via the Mi Home app.
Features:
- Turn on/off and schedule your floor stand light from your phone
- Monitor power usage
- Group with other Mi Home devices for smart home automation
What You'll Need:
- Xiaomi Smart Plug 2
- 3D Printer
- Basic electronics tools (soldering iron, wire strippers, etc.)
Steps:
- Tear Down: Open up the Xiaomi Smart Plug 2 and carefully remove the necessary electronics.
- Design: Download the 3D-printable casing STL files.
- 3D Print: Print the casing using your 3D printer.
- Assembly: Place the Xiaomi Smart Plug 2 components into the new casing. For signal LED reuse original plastic part from plug, just cut it to measure. Screws: M3 x 20mm 2 pcs and M2 x 20mm 2 pcs. PCB is screwed using screws from original plug case.
- Installation: Attach the newly cased electronics to your old floor stand light.
- Setup: Configure the device using the Mi Home app to integrate it into your smart home system.
Safety Precautions:
Please exercise caution while handling electrical components. Always unplug any devices before working on them.