1 / 3
Universal Handle for Ice Scraper or Squeegee
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an universal handle that every car owner needs to see out the car windows when the weather attacks! You can…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This is an universal handle that every car owner needs to see out the car windows when the weather attacks!
- You can fit an ice scraper (such as this)
- You can fit a squeegee for the foggy days (such as this or this).
- You could fit a sponge, but you would have to create your own.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
25%
Filament:
Verbatim PETG Blue Transparent
Notes:
Print standing upright (it is 174.20 mm tall, though), without supports.
Use a brim for added stability, but it should be stable enough without one.
Print settings I have used:
- Layer resolution/height: 0.20
- Perimeters: 4
- Infill 25% (gyroid)
- Aligned seams (in the back, right in the middle of the ribbing pattern)
- Solid infill threshold area: cca 150 mm^2 (to strengthen the weakes spot) Make sure to print with a material that withstands the heat inside the car!
Category: Automotive