Another Oral-B (Braun) Electric Toothbrush stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple stand for placing the device next to the washbasin.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 180
- Wydruki
- 2
- Wyświetlenia
- 603
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
1.- Introduction
As with all prints I do, all start or from a need, a fix or a lust-to-have.
The original Orab-B Electric Toothbrush has a stand that is connected to the charger, something I do not like to be next to the washbasin (Water and electricity is not healthy), therefore I decide to model one, using the original base but without the charger part or additional parts.
The model was designed in Fusion360, with the aid of a caliper in order to get the correct measurements.
2.- Printing the Model
No special requirements exist for printing this model.
I opted to print it using PETG, because that is what was loaded on the printer.
No supports are needed to get well printed.
| Printer | Prusa MINI+. |
| File | OralB-Electric-Toothbrush-Stand.stl |
| Print Time | 1:08min. |
| Filament used | 4.8mt (13gr) Cold White eSUN PETG. |
| Layer height | 0.2mm. |
| Printer Nozzle | 0.4mm. |
| Perimeters | 3 to enforce walls around the holes. |
I have upload the GCODE file for a Prusa Mini+ as well.
Feel free to use the one that suits you best.
3.- Change Log:
- Upload: 2023-10-23: Initial Version.
4.- Last Words
Please don't forget to ★ Rate and ❤ Like
Post your Makes to earn Prusameters!
Do not hesitate to ask questions, feedback is essential to making better models.
You are kindly invited to follow me to get updated when upload new models.
Happy printing & Greetings from the Galilee.
Hope it was not TL;DR