iPhone 6S Olloclip Compatible Honeycomb Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you still have an older iPhone because some of its awesome accessories, such as an Olloclip? This is an iPhone 6/6S…
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 557
- Wydruki
- 9
- Wyświetlenia
- 1744
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
Do you still have an older iPhone because some of its awesome accessories, such as an Olloclip?
This is an iPhone 6/6S protective case that is Olloclip compatible and comes with an attractive honeycomb pattern.
Stand out from the crowd and show everybody that 3D printing people have the style!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
20
Filament:
Prusament PETG Carmine Red
Notes:
No additional supports are required to print this. The detachable support for the Olloclip corner is built-in the model.
NOTE: There are three files!
- One file has a .20 gap between the support and the case
- Another file has a .40 gap between the support and the case (in case you have problems detaching the support)
- Last file has a .20 gap and an alternative bottom (only the port/mic/speaker holes are cut), this works better for FLEX filaments.
I've printed mine using a Prusament PETG (Carmine Red), Fillamentum Flexfill 98A (Traffic Black), and Fillamentum Flexfill TPE 96A. All three worked just fine and the .20 gap was enough to detach the built-in support.
This case is a tight fit, so if you're not printing using a flexible filament, be careful when putting the case on.
Category: Mobile Phone