Mushroom Nightlight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nightlight for an electric tealight shaped like a mushroom
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A cute little mushroom nightlight for you, your kids or as decoration.
It is an easy to print model. You need no supports.
I don't know if electric tealights have the same size all over the world? So I added a electric tealight model as reference. You can scale the tealight and the mushroom to the size you need.
IMPORTANT: I recommend using electric tealights only! Regular tealights not tested and will damage the printed model. Don't use them!
Please leave a like, share your make on Printables, Cults3D, Instagram and TikTok and tag Neopyx3D.
This download is for personal and non-commercial use only. Dont sell my designs or printed designs without permission.
If you want to sell your 3D-printed Neopyx3D designs you need a Neopyx3D - Vendor membership via Patreon.
Feedback is always welcome.
Thank you for download and happy printing!
___________________________________________________________________
3D Printing Settings
Recommended Main Settings:
Layer height: 0.2
Infill: 100% (original size)
Speed: 40 - 60 mm/s
Print Acceleration: 2750 mm/s2
Print Jerk: 9 mm/s
Supports: No Supports needed
Build Plate Adhesion Type: Brim (Skirt sufficient on Bottom Plate)
Printing Temperature and Cooling: depends on filament