Jackpot CNC Controller Case - MPCNC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jackpot CNC Controller Case used for my MPCNC w/ 40mm fan and plexiglass window
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 1107
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
So I wanted to have a good case for my Jackpot Controller, but was not in love with the options. This is my first time designing something and utilizing it. It was designed to use a 3mm acrylic sheet (~75mm x ~136mm) depending on your tolerances.
I used tree supports and they seemed to work great.
I am also uploading the .step file if anyone wanted to tinker with it, as I'm sure there are more talented people who can perfect this model.
BOM:
- 3mm Heat-set inserts (for the cnc controller to mount to)
- 10 M3x6 screws (4 to mount the controller, 2 to secure the lid to the base, 4 to secure the fan)
- 3mm acrylic sheet (cut ~75mm x ~136mm)
- 40mm fan (I made the standoffs so they insert into my fan mounts snugly and then secured with M3 screws)
- (optional) Whatever countersunk screws to use to secure the case to your machine
Again, this is my first attempt at doing something like this and I would probably change a couple of things, but this suits my needs as-is. Hopefully this helps someone else!