Pumpkin Box (Print in Place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Large & Small Pumpkin Box
- Ocena
- 5 / 5
- Polubienia
- 436
- Pobrania
- 1511
- Wydruki
- 22
- Wyświetlenia
- 5094
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial
This pumpkin model can be printed in place without supports and has a screw in the stalk to lock it closed.
Try Remixing it by 'carving' a face for Halloween.
I modelled both Pumpkins to have a 1mm wall thickness so they can print with 2 lines per wall with a 0.4 nozzle.
You can increase the size of both models, but they might need extra support for the larger overhangs. You shouldn't reduce the size of either, as the wall thickness will become to thin and will likely fail.
Recommended print settings to help with the first layers & thin walls:
- Brim of 3mm or 7 lines
- Initial layer height of 0.2mm
- Reduced speed for initial layer
The Large Pumpkin is 74mm round and the small Pumpkin is 37mm round.
Included are the STL's and STEP Files so you can easily re-mix it. The Stalks in the STEP files are slightly different to the STL's as MeshMixer was used to give them a slight bend.