Pegboard Detail/Miniature Paint Brush Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1in/2.54cm Pegboard-compatible holder design for paintbrushes, specifically detail paint brushes. No supports required.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 198
- Wydruki
- 0
- Wyświetlenia
- 1107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a way to organize my detail paint brushes on my pegboard, so I designed this holder. Holds up to 10 paint brushes. No supports required.
Obviously, it doesn't have to be detail paint brushes, but this model was designed for this popular detail brush kit on Amazon: https://www.amazon.com/Detail-Brushes-Miniature-Detailing-Painting/dp/B075L8LCTG/
Each circle cut-out is 9.5mm in diameter. The pegs are 3 inches/7.62cm apart. The outside pegs are 6 inches/15.24cm apart.
Print Settings:
As Pictured
Filament: PETG
Layer Height: 0.2mm
Infill: 100%
Perimeters: 3
I tried to limit the amount of extraneous filament in this designed to keep the required amount of filament low. That said, I went with 3 perimeters and 100% to give the design more strength all around and it worked nicely.
You can probably get away with printing with fewer perimeters and infill and even try with PLA. YMMV.